5.1 Testing Requirements
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.60(33) - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - (adopted on 30 October 1992)Clasifications Register Note: See also Resolution MEPC.107(49) - Annex - Guidelines and Specifications for Pollution Prevention Equipment for Machinery Space Bilges of Ships - 5 Specifications for Type Approval Testing of Pollution Prevention Equipment - 5.1 Testing Requirements

5.1 Testing Requirements

  5.1.1 The production model of pollution prevention equipment, for which the approval will apply, should be identical to the equipment, type-tested in accordance with the Test and Performance Specifications contained in part 1 or 2 of the annex to these Guidelines and Specifications. The equipment should also be type-tested in accordance with the specifications for environmental testing contained in part 3 of the annex.

Parent topic: 5 Specifications for Type Approval Testing of Pollution Prevention Equipment
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.