6.4.17 Form of approval
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - International Codes - NOx Technical Code (2008) - Technical Code on Control of Emission of Nitrogen Oxides from Marine Diesel Engines - Chapter 6 - Procedures for demonstrating compliance with NOx emission limits on board - 6.4 Direct measurement and monitoring method - 6.4.17 Form of approval

6.4.17 Form of approval

  6.4.17.1 The direct measurement and monitoring method shall be documented in an onboard monitoring manual. The onboard monitoring manual shall be submitted to the Administration for approval. The approval reference of that onboard monitoring manual shall be entered under section 3 of the supplement to the EIAPP Certificate. The Administration may issue a new EIAPP Certificate, with the details in section 3 of the supplement duly amended, if the method is approved after the issue of the first EIAPP Certificate, i.e. following the pre-certification survey.

Parent topic: 6.4 Direct measurement and monitoring method
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.