A Longitudinal divisions
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.488 – Containers and Cargoes – (Adopted on 6 June 1988) - Carriage of GrainGuidance on interpretations and equivalences - Appendix - A Longitudinal divisions

A Longitudinal divisions

 The load in kN per metre length of the divisions shall be taken to be as follows:

h = height of grain in metres from bottom of the divisionfootnote.
B = transverse extent of the bulk grain in metres.

  • a. For values of h equal or less than 6.00 m the force shall be determined by linear interpolation or extrapolation as necessary.

  • b. For values of h exceeding 6.00 m the force shall be determined using the values of p/h2given in table I.1.

Parent topic: Appendix
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.