5.1 Longitudinal strength
and stability calculation programs should be handled by qualified
personnel fully familiar with the program and the user's manual. It
is recommended that the operators verify the correct functioning of
the program at regular intervals using the endorsed test conditions
and maintain a record of the tests carried out.
5.2 The program is required
to be tested for continued accuracy at each annual or periodical survey
using all the endorsed test conditions supplied with the program at
initial installation.
5.3 Where type approved
hardware is not used, the tests are to be carried out on the first
and second nominated computers.
5.4 The local Surveyor
will witness the test being carried out by the ship's personnel (in
preference to carrying out the test himself) and results IDENTICAL
or within the specified acceptable tolerances (stated on the “Certificate
of Approval”) of the endorsed test conditions should be obtained.
5.5 A copy of the user’s
manual, endorsed test conditions, “Certificate of Approval”
and “Installation Test Certificate” for the program should
be held on board ship. Failure to provide the manual on board the
vessel will invalidate the program installation test certificate.
An on-line user manual (Help function) will not satisfy this requirement.