2.8 Salinity and Temperature
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Marine Environment Protection Committee - Resolution MEPC.2(VI) - Recommendation on International Effluent Standards and Guidelines for Performance Tests for Sewage Treatment Plants... - Annex B - Guidelines for Performance Tests for Sewage Treatment Plants With Respect to Effluent Standards - II Testing Considerations - 2.8 Salinity and Temperature

2.8 Salinity and Temperature

 Tests for certification should be carried out over the range of temperature and salinity specified by the manufacturers, and Administrations should be satisfied that such specifications are adequate for the conditions under which the equipment must operate. Any limitation on the conditions of operation should be recorded on the certificate.

Parent topic: II Testing Considerations
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.