1 This annex contains the fire test procedures
which shall be used for verifying that the products comply with the
applicable requirements. For other test procedures provisions in paragraph 8.2 of, and annex
3 to, the Code shall apply.
2 Reference to the test procedures of this annex
shall be made (e.g., in the test report and in the type approval certificate)
by referring to the applicable part number or numbers as follows:
| Example:
|
Where a primary deck covering has been tested in accordance with parts 2 and 6 of
annex 1, the reference shall be "IMO FTPC Parts 2 and 6".
|
3 Some products or their components are required
to be tested in accordance with more than one test procedure. For
this purpose, references to other parts are given in some parts of
this annex. Such references are here for information only, and the
applicable guidance shall be sought in the relevant requirements of
the Convention.
4 For products which may be installed without
testing and/or approval, annex 2 to the Code is referred.