Paragraph 6 - Test approval
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Maritime Safety Committee - Resolution MSC.141(76) - Revised Model Test Method Under Resolution 14 of the 1995 SOLAS Conference - (adopted on 5 December 2002) - Attachment - Guidance Notes on the Revised Model Test Method - Paragraph 6 - Test approval

Paragraph 6 - Test approval

 The following documents should be part of the report to the Administration:

  • .1 damage stability calculations for worst SOLAS and midship damage (if different);

  • .2 general arrangement drawing of the model together with details of construction and instrumentation;

  • .3 inclining experiment and measurements of radii of gyration;

  • .4 nominal and measured wave spectra (at the 3 different locations for a representative realisation and for the tests with the model from the probe closest to the wave maker);

  • .5 representative records of model motions, attitude and drift; and

  • .6 relevant video recordings.

  Note: All tests must be witnessed by the Administration.

Parent topic: Attachment - Guidance Notes on the Revised Model Test Method
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.