7 Display Mode and Generation of the Neighbouring Area
Clasification Society 2024 - Version 9.40
Statutory Documents - IMO Publications and Documents - Resolutions - Assembly - IMO Resolution A.817(19) – Performance Standards for Electronic Chart Display and Information Systems (ECDIS) – (Adopted on 23 November 1995) - Annex - Performance Standards for Electronic Chart Display and Information Systems (ECDIS) - 7 Display Mode and Generation of the Neighbouring Area

7 Display Mode and Generation of the Neighbouring Area

  7.1 It should always be possible to display the SENC in a ‘‘north-up’’ orientation. Other orientations are permitted.

  7.2 ECDIS should provide for true motion mode. Other modes are permitted.

  7.3 When true motion mode is in use, reset and generation of the neighbouring area should take place automatically at a distance from the border of the display determined by the mariner.

  7.4 It should be possible manually to change the chart area and the position of own ship relative to the edge of the display.

Parent topic: Annex - Performance Standards for Electronic Chart Display and Information Systems (ECDIS)
Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.