Section 2 Definitions

Clasification Society 2024 - Version 9.40

Clasifications Register Guidance Information - Guidance Notes for the Certification of Masts, Spars and Standing Rigging, January 2017 - Chapter 1 Guidance notes for the certification of masts, spars and standing rigging - Section 2 Definitions

Section 2 Definitions

2.1 Code

2.1.1 Where the text refers to ‘the code’, this means the Large Commercial Yacht Code LY3 as amended, or its successor.

2.2 Rig

2.2.1 For reasons of readability of this text the combination of masts, spars and standing rigging will henceforth be referred to as ‘the rig’.

2.3 Manufacturer

2.3.1 The ‘manufacturer’ is defined as the body that has signed the contract with LR for the certification of the rig.

The manufacturer takes responsibility for the rig in all aspects relevant for the purpose of certification. The manufacturer takes care of timely submission of the relevant documents and for the solution of any deficiencies that may be encountered. The manufacturer keeps and maintains the Technical Construction File (TCF).

The Certificate(s) will be under the name of the manufacturer and issued to the manufacturer.

Copyright 2022 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.