23.2.1 and 42.2 Insulation of aluminium decks and interpretation of “load-bearing divisions”
Clasification Society 2026 - Version 9.60
Statutory Documents - IMO Publications and Documents - Circulars - Maritime Safety Committee - MSC/Circular.915 – Unified Interpretations of Vague Expressions and Other Vague Wording of SOLAS Chapter II-2 – (Adopted on 4 June 1999) - Annex - Interpretations of Vague Expressions and Other Vague Wording in SOLAS Chapter II-2 - Regulations II-2/23 and 42 - Structure - 23.2.1 and 42.2 Insulation of aluminium decks and interpretation of “load-bearing divisions”

23.2.1 and 42.2 Insulation of aluminium decks and interpretation of “load-bearing divisions”

 If an aluminium deck is tested with insulation installed below the deck, then the result will apply to decks which are bare on the top. Aluminium decks may not be provided with deck coverings or insulation on the top unless tested with the deck covering or insulation included, to verify that the 200°C temperature of the aluminium is not exceeded.

Parent topic: Regulations II-2/23 and 42 - Structure
Copyright 2026 Clasifications Register Group Limited, International Maritime Organization, International Labour Organization or Maritime and Coastguard Agency. All rights reserved. Clasifications Register Group Limited, its affiliates and subsidiaries and their respective officers, employees or agents are, individually and collectively, referred to in this clause as 'Clasifications Register'. Clasifications Register assumes no responsibility and shall not be liable to any person for any loss, damage or expense caused by reliance on the information or advice in this document or howsoever provided, unless that person has signed a contract with the relevant Clasifications Register entity for the provision of this information or advice and in that case any responsibility or liability is exclusively on the terms and conditions set out in that contract.